AvMap ekp iii c ユーザーズマニュアル

function (the units of measure used for the values entered here are selected from Units Setup menu

in the System Setup Menu, see Par. 13.5). This feature requires that a Flight Plan be activated.

>‘MENU’ 1 sec.+ “CALCULATOR” + ‘ENTER’ + “VERTICAL NAVIGATOR” + ‘ENTER’

User data is entered in the fields at the bottom half of the screen. To set Vertical

Navigation parameters use ‘ENTER’ to edit the selected field (a box appears around the active

field) and the cursor key to move between fields. Press ‘ESC’ to return to Calculator menu.

NOTE

The Vertical Navigation solution estimates the target altitude (altimeter reading) from glideslope, distance to

the Waypoint, and the total altitude change. GPS altitude is not accurate enough for stand alone vertical navigation.

Some values are automatically displayed. Time To Go, Distance, Descent Rate and Altitude

From are based on current GPS data. An Altitude To is displayed if a Traffic Pattern Altitude

for the destination exists in the Database. Altitude From, Altitude To, Offset Distance and

Glide Slope can be edited.

Vertical Navigation is a full screen page with the following structure:

Fig. 10.4 - Vertical Navigation page

EKP III USER MANUAL