AvMap ekp iii c ユーザーズマニュアル
Fig. 10.1a - Vertical Navigation function
Vertical Navigation can be activated (On) only if a Flight Plan is active (destination present).
Destination point for Vertical Navigation is the last point of the Route or destination of GoTo mode.
Destination point for Vertical Navigation is the last point of the Route or destination of GoTo mode.
Prior to the Descent Point being reached the Distance To Go displays TO, Time To
Go to Descent point and Descent Rate from the current position.
After passing Descent point the system displays TO, Time To Go to the Destination
and Target altitude based on actual descent profile. Time To Descent or Target ALT values can
be displayed in the Data Window of Moving Map and HSI modes.
be displayed in the Data Window of Moving Map and HSI modes.
The Vertical Navigation value displayed in the HSI is calculated as a difference between
current altitude (from GPS) and Target altitude.
10.5 WIND CALCULATION
The Wind Calculation feature computes winds aloft by comparing Ground Speed and Track
with indicated heading, indicated air speed and Outside Air Temperature.
with indicated heading, indicated air speed and Outside Air Temperature.
>‘MENU’ 1 sec. + “CALCULATOR” + ‘ENTER’ + “WIND CALCULATION” + ‘ENTER’
User data is entered in the fields at the bottom half of the screen. To set Wind
Calculation parameters use ‘ENTER’ to edit the selected field (a box appears around the active
field) and the cursor keys to move between fields. Press ‘ESC’ to return to Calculator menu.
field) and the cursor keys to move between fields. Press ‘ESC’ to return to Calculator menu.
EKP III USER MANUAL
75