Printronix L5020 ユーザーズマニュアル

ページ / 248
Chapter 2
Using The Control Panel
36 
LINE SYNC
Twinax interface only. Indicates there is activity on the line from the 
host computer.
SYS AVAIL
Twinax interface only. Indicates there is activity to the current 
address on the line.
JOB IN PROCESS
When the printer is receiving data or processing data, JOB IN 
PROCESS flashes. If data has been processed and is waiting to be 
printed, or has been printed but not yet fused and ejected by the 
printer, JOB IN PROCESS lights continuously.
JOB IN PROCESS does not light when the printer is not processing 
data, no data exists in the buffer, and the printer is not receiving 
data.
STAND BY
IMPORTANT
Do not press any control panel key when STAND BY is 
flashing. The printer may carry out unwanted commands. 
STAND BY flashes while the printer is executing any control panel 
command, and while the printer is unavailable for printing due to its 
normal system activities, such as booting, printing its configuration, 
writing status information, and loading applications.
ONLINE
ONLINE is lit continuously when the printer is online (when the 
printer is ready to print and accept data from the host). It flashes 
when the printer is offline or when the printer stops because of an 
error.
FAULT
FAULT flashes when the printer is unavailable for printing because 
of an internal error.