Printronix l7032 参照マニュアル

 50

NOTE: Dark printing has no effect on thermal and laser L7032 printers and is 

included for compatibility with line matrix printers. 

Dark Print command prints all dot positions at half-dot resolution 
to produce images with a darker intensity. The KF command 
provides special attention when used with bar codes to provide 
darker bar codes, yet not change the critical bar-width 
dimensions. Human readable data, however, will print in non-dark 
mode. Dark print is discussed further in the “Bar Codes” chapter.

The KF command operates as a toggle. The first KF command 
enables dark printing, the second KF disables dark printing, the 
third KF enables dark printing, and so on.

All data following the first KF command will print dark until the 
second KF command is encountered.

The KF command is a part of the data contained in an 
alphanumeric command. When the alphanumeric command 
sequence is terminated, dark printing is also disabled.

Reverse printing and shading or mask shading can be combined 
with dark printing to produce a variety of different shades.

The following sample commands illustrate dark printing. 
Combining shading and dark print is also shown. 

^PY^-
^M03,03,000IGP^KFIGP^KHIGP^KH^KF^-
^PN^-

^PY^-
^V05,05,000IGP^KFIGP^KHIGP^KF^KH^-
^PN^-