Printronix l7032 参照マニュアル
52
Chapter
2
Command Codes
NOTE: The default setting for the D command is OFF.
The default setting for the IFONT command, however, is ON.
If the D command is used after an IFONT command and before the
command terminator, the D command will always be ON. The IFONT
command always overrides a D command.
command terminator, the D command will always be ON. The IFONT
command always overrides a D command.
Example
The following sample commands illustrate descending character
printing. In the first example, notice that the alphanumerics
command sequence terminator was also used to end descending
character printing. In the second example, notice that when using
the rotate clockwise (^V) command with descending characters,
and dots are positioned in the
printing. In the first example, notice that the alphanumerics
command sequence terminator was also used to end descending
character printing. In the second example, notice that when using
the rotate clockwise (^V) command with descending characters,
and dots are positioned in the
first dot column, a .10-inch tab was
required to prevent out-of-bounds descending characters.
^PY^-
^M02,02,000IGP or igp^D and IGP or igp^-
^PN^-
^PY^-
^V03,03,000^T0010igp^Digp^D^-
^PN^-
descend.ex