Printronix SL5000e ユーザーズマニュアル
Overview
197
Alt. Set 80-9F (P-Series, Serial Matrix, Epson FX)
•
Control Code. Interprets data in the range of hex 80 through hex 9F as a
control code.
control code.
•
Printable. Prints data in the range of hex 80 through hex 9F.
The factory default is Control Code. However, when the CTHI option is
installed, the factory default is Printable.
installed, the factory default is Printable.
Alt. Set 80-9F (Coax, Twinax, TN3270, TN5250)
•
Printable. Prints data in the range of hex 80 through hex 9F.
•
Control Code. Interprets data in the range of hex 80 through hex 9F as a
control code.
control code.
The factory default is Printable.
Append Rotated
(From page 178.)
•
Disable. Logos and alphanumeric strings are treated as separate
elements.
elements.
•
Enable. Appends logos to an alphanumeric string rotated in a clockwise,
counterclockwise, or inverted orientation.
counterclockwise, or inverted orientation.
The factory default is Disable.
AR Pre-Feed CMD
(From page 183.) This option allows you to choose whether the engine
command for a paper pre-feed (AR) should be processed or ignored. When
you select “Ignore,” the paper will not be pre-fed.
command for a paper pre-feed (AR) should be processed or ignored. When
you select “Ignore,” the paper will not be pre-fed.
The factory default is Process.
Auto FF at ^PN
(From page 179.) When enabled, an FF will be generated automatically to
slew to the end of form when the ^PN command is encountered and when the
current vertical position is not at the top-of-form.
slew to the end of form when the ^PN command is encountered and when the
current vertical position is not at the top-of-form.
The options are Disable (the factory default) and Enable.