Printronix SL5000 参照マニュアル
52
Chapter
2
Configuring the P-Series Emulation with Control Codes
Line Spacing
n/216 Inch
ASCII Code SFCC 3
n
Hex Code
SFCC 33
n
Dec Code
SFCC 51
n
Purpose
Specifies the line spacing at
n/216-inch increments.
where:
n = 1 through 255 (hex 01 through hex FF)
Comment
When the
n/216-inch line spacing control code is received, all
line feeds following are at
n/216-inch line spacing until a new line
spacing is selected or the printer is reset. The control code line
spacing selection overrides the control panel line spacing
setting.
spacing selection overrides the control panel line spacing
setting.
The vertical character position moves only in multiples of the
current dot row spacing. If the distance to move is other than a
multiple of the current dot row spacing, the remainder is added
to the next paper motion command.
current dot row spacing. If the distance to move is other than a
multiple of the current dot row spacing, the remainder is added
to the next paper motion command.
Caution should be used when combining this control code with
other print attributes such as Elongated (Double High),
Superscript, or Subscript; overlapping lines may occur. Printing
at different horizontal and vertical densities do not overlap.
other print attributes such as Elongated (Double High),
Superscript, or Subscript; overlapping lines may occur. Printing
at different horizontal and vertical densities do not overlap.
Example
The following example illustrates
n/216-inch line spacing.
Overscoring
ASCII Code SFCC _
n
Hex Code
SFCC 5F
n
Dec Code
SFCC 95
n
Purpose
Enables or disables automatic overscoring of all characters.
where:
n = 0 to disable automatic overscoring (hex 00 or hex 30)
n = 1 to enable automatic overscoring (hex 01 or hex 31)
n = 1 to enable automatic overscoring (hex 01 or hex 31)
Comment
When automatic overscore is enabled, all characters, including
spaces, are overscored until disabled.
spaces, are overscored until disabled.