Toshiba sd-v395kc オーナーマニュアル

Load a cassette tape with the erase prevention tab 

intact.

The VCR will automatically turn on.

•

Press SP/SLP to select the desired tape speed SP 

or SLP. 

The tape counter and “SP” or “SLP” will appear 

on the screen for about 

4 seconds.

•

Set “TV” or “CABLE” option to the appropriate 

position 

.

Press Direct channel selection buttons (0–9) or 

CH +/– to select the channel to be recorded.

Press REC/OTR. Recording begins. Press the button 

again to stop recording after 30 minutes. Each 

additional press of REC/OTR will increase recording 

time as shown in the chart below, up to a maximum 

of 6 hours.

Press

Recording time Press

Recording time

once

NORMAL REC 6 times

3:00

twice

0:30

7 times

4:00

3 times

1:00

8 times

5:00

4 times

1:30

9 times

6:00

5 times

2:00

10 times NORMAL REC

The OTR and recording time will appear on the 

screen for about 4 seconds, then change to “   ”.

•

The One-touch Timer Recording feature provides a simple and 

convenient way to make a timed recording.

Press STOP or turn off the power.

“   ” will appear on the screen for about 4 seconds.

•

If you wish to watch the DVD playback during OTR or standard 

recording, press VCR DVD selector to change to DVD mode 

and perform the DVD playback 

.

Press VCR MENU. Select “TIMER REC SET”, then 

press ENTER.

Press SET + or – to select one of the program line, 

then press ENTER.

Press SET + or – to select the date, then press 

ENTER.

Set the start time, end time, channel and tape speed 

as in step 3.

Press CANCEL to move cursor backward for correction.

To record from external source set the channel to “L1” or 

“L2”. 

•

•

To enter other programs, repeat step 2 through 4.

To return to the normal screen, press VCR 

MENU twice.

•

Press TIMER REC. The timer symbol (   ) will 

appear on the display and the VCR standbys for 

recording.

At the same time, VCR mode will change to DVD 

mode automatically. You can use DVD even if the 

VCR is in the timer recording mode. If you do not 

use the DVD, turn the power off.

•

Notes:

The timer recording will start at 5 seconds before the 

preset starting time.

If the timer symbol (   ) does not appear on the display 

when TIMER REC is pressed, the cassette is not inserted 

.

If the cassette is ejected when TIMER REC is pressed, 

the erase prevention tab of the cassette may have been 

removed 

.

•

•

•

If the timer symbol (   ) blinks when the timer recording 

ended, the TV program has not been completely recorded 

because of an insufficient tape length. Press TIMER REC 

to cancel the timer program or press EJECT to remove the 

cassette tape.

During timer recording standby mode, the VCR mode 

cannot be operated. To use the VCR, first press TIMER 

REC, then press VCR DVD selector to change to VCR 

mode. After VCR mode is selected, press TIMER REC 

again to put the VCR into timer recording standby mode.

If you press TIMER REC during timer recording, the 

recording operation will be interrupted. If you press TIMER 

REC again within the programmed time, the recording 

operation will start again. 

After a power failure or disconnection of the power plug, all 

programmed recording settings and time display will be lost 

upon resumption of power. In this case, reset the clock 

 

and reprogram any timer recording.

•

•

•

•

Timer recording can be programmed on-screen with the 

remote control. The built-in timer allows automatic unattended 

recording of up to 8 programs within 1 month.

Turn ON the TV and select to the corresponding  

video input.

Press VCR DVD selector to select the VCR mode. (The 

VCR mode indicator will light.)

Example: One-touch Timer Recording for 30 minutes.

•

•

Press VCR DVD selector to select the VCR mode. 

Load a cassette tape with the erase prevention tab 

intact.

Check the time and date are correct 

.

•

•

•

2K60121A.indb   29

2K60121A.indb   29

1/12/2007   3:50:12 PM

1/12/2007   3:50:12 PM