Toshiba sd-v395kc オーナーマニュアル

ページ / 49
45
Others
Symptoms
Solutions
Page
DVD/VCR
DVD/VCR does not operate.
Make sure the power cord is plugged in.
Try another AC outlet.
Unplug unit, then plug it back in.
Select the DVD or VCR mode before operating.
5
5
26, 32
No picture.
Antenna connection is not correct or antenna cable is 
disconnected.
The video channel is not in the correct position or the TV is not 
set to the video channel 3 or 4.
Check the unit is connected correctly.
The video input selector of the TV is not set to VIDEO. Set to 
VIDEO (or equivalent).
Channel is set to the external mode.
14~17
22
14~19
No sound. 
Check the unit is connected correctly.
Check the input selector of the amplifier is set properly.
The unit is in the Special playback mode.
14~21
26, 33
The remote control does not function.
Aim the remote control at the remote sensor.
Operate within Approx. 7 meters or reduce the light in the room.
Clear the path of the beam.
The batteries are weak. Replace the batteries.
Check the batteries are inserted correctly.
13
No Cable TV reception.
Check all Cable TV connections.
Station or Cable TV system problems, try another station.
16, 17
VCR
TV recording does not work.
The erase prevention tab of the video cassette is broken off.
The unit is in the external input mode.
25, 28
Timer recording does not work.
The time is not set correctly.
The recording start/end time is not set correctly.
The TIMER REC has not been pressed (  is not lit).
23~24
29
29
Noise bars on screen.
Tracking adjustment beyond range of automatic tracking circuit. 
Try Manual tracking adjustment.
Video heads are dirty.
The tape is worn or damaged.
26
27
DVD
Display is not shown in your language.
Select proper language in the menu options.
41
Playback doesn’t start.
No disc is inserted.
The disc may be dirty. Clean up the disc.
The unit cannot play DVD-ROMs, etc.
32
7
8
Stopping playback, slow-motion play, 
repeat play, or memory play, etc. cannot be 
performed.
Some discs may not do some of the functions.
No picture, or the screen is blurred or 
divided into two parts.
The progressive scan is “On” although the unit is connected to a 
TV via the VIDEO OUT or the S-VIDEO OUT jack.
43
No 4:3 (16:9) picture.
The setup does not match your TV.
41
No on-screen display.
Set Display to “On”.
42
No surround sound.
The setup does not match your stereo system.
20
The unit or remote operation key is not 
functioning.
Turn off the unit and unplug the AC power cord for several 
minutes, then replug it.
Playback does not start when the title is 
selected.
Check the Parental setup.
42, 43
Audio soundtrack and/or subtitle language is 
not changed when you playback a DVD.
Multilingual language is not recorded on the DVD disc.
35, 36
No subtitle.
Some discs have no subtitles.
Subtitles are cleared. Press SUBTITLE.
36
Angle cannot be changed.
Multi-angles are not recorded on the DVD disc.
35
“   ” appears on the screen.
The function is prohibited with the unit or the disc.
8, 33
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the symptoms and some solutions.
2K60121A.indb   45
2K60121A.indb   45
1/12/2007   3:50:21 PM
1/12/2007   3:50:21 PM