Netgear FVL328 参照マニュアル

7-12

Managing Your Network

The Attached Devices menu contains a table of all IP devices that the firewall has discovered on 
the local network. From the main menu of the browser interface, under the Maintenance heading, 
select Attached Devices to view the table, shown in 

.

For each device, the table shows the IP address, Device Name (NetBIOS Host Name, if available), 
and the Ethernet MAC address. Select the check box if you want to enable NetBIOS detection. If 
the NetBIOS name is not available, “Unknown” is listed as the Device Name. 

System up Time

The time elapsed since the last power cycle or reset.

WAN or LAN Port

The statistics for the WAN (Internet) and LAN (local) ports. For each port, the screen 
displays:

Status

The link status of the port.

TxPkts

The number of packets transmitted on this port since reset or manual clear.

RxPkts

The number of packets received on this port since reset or manual clear.

Collisions

The number of collisions on this port since reset or manual clear.

Tx B/s

The current line utilization—percentage of current bandwidth used on this port.

Rx B/s

The average line utilization —average CLU for this port.

Up Time

The time elapsed since this port acquired the link.

Poll Interval

Specifies the intervals at which the statistics are updated in this window. Click Stop to 
freeze the display. Click Set Interval to set the polling refresh interval.