Netgear FVX538 補足マニュアル
C o n f ig u r in g th e F VX 5 3 8 # 2
To configure the FVX538 #2:
1. Create an IKE policy to FVX538 #1.
2. Create a VPN policy using the IKE policy created in Step 1. For the local subnet, use
the LAN subnet behind FVX538 #2. For the remote subnet, use the LAN subnet
behind FVX538 #1.
behind FVX538 #1.
3. Create the second VPN policy to allow the VPN client to access the network behind
FVX538 #2. Use the same IKE policy that you created in Step 1. For the remote
network, enter the network address being used by the VPN client, which is
192.168.4.0, subnet mask 255.255.255.0.
network, enter the network address being used by the VPN client, which is
192.168.4.0, subnet mask 255.255.255.0.
C o n f ig u r in g th e V PN C l i en t S o f tw a r e
To configure the VPN client software:
1. To create a new connection, under Remote Party Identity and Addressing, define an
object to cover both LANs behind FVX538 #1 and FVX538 #2. In this case, select
IP Address Range as the ID Type and enter an IP address range of 192.168.1.1 to
IP Address Range as the ID Type and enter an IP address range of 192.168.1.1 to