Netgear FVX538 補足マニュアル

192.168.2.254. This will cover both 192.168.1.0, subnet mask 255.255.255.0 and 
192.168.2.0, subnet mask 255.255.255.0. 

2.  Click on My Identity For Internal Network IP Address, enter the same address used 

in the client VPN policy on the FVX538 #1, which is 192.168.4.100. The rest of the 
configurations are the same as a standard VPN client configuration.  

3.  Configure the Security Policy.  

4.  Configure the Authentication/Proposal 1. 

5.  Configure the Key Exchange/Proposal 1.  

To test the connection:

1.  Right-click the VPN client icon on the system tray.  

2.  Select Connect and choose the client policy that you just created. A pop-up window 

appears showing  an “attempting to connect” message. Eventually the message will 
show that there is a successful connection to the FVX538. 

3.  From the command prompt, ping both the subnets behind FVX538 #1 and  

FVX538 #2.  

If user wants to configure two remote locations so their traffic goes through a central 
location instead of directly between them, please refer to this document.