Netgear HR314 参照マニュアル

ページ / 123
Reference Manual for the Model HR314 802.11a Hi-Speed Wireless Router
Network and Routing Basics
B-13
 
Wireless Channel Selection
IEEE 802.11a utilizes 300 MHz of bandwidth in the 5 GHz Unlicensed National Information 
Infrastructure (U-NII) band. Though the lower 200 MHz is physically contiguous, the FCC has 
divided the total 300 MHz into three distinct domains, each with a different legal maximum power 
output.
The radio frequency channels used are listed in 
:
Note: 
The high band is not supported in the Model HR314 802.11a Hi-Speed Wireless Router.
IEEE 802.11a uses Orthogonal Frequency Division Multiplexing (OFDM), a new encoding 
scheme that offers certain benefits over a spread spectrum in channel availability and data rate. 
The 802.11a uses OFDM to define a total of 8 non-overlapping 200 MHz channels across the 2 
lower bands; each of these is divided into 52 subcarriers and each carrier is approximately 300 
KHz wide. By comparison, 802.11b uses only 3 non-overlapping channels.
Table B-4.
802.11a Wireless Channels
U-NII Band
Low
Middle
High
Frequency (GHz)
5.15 – 5.25
5.25 – 5.35
5.725 – 5.825
Max. Power Output
50 mW
250 mW
1W