Netgear HR314 参照マニュアル
Reference Manual for the Model HR314 802.11a Hi-Speed Wireless Router
4-8
Basic Configuration of the Router
Note:
You will no longer need to launch the ISP’s login program on your PC in order to
access the Internet. When you start an Internet application, your router will automatically log
you in.
you in.
3.
Domain Name Server (DNS) Address: If you know that your ISP does not automatically
transmit DNS addresses to the router during login, select “Use these DNS servers” and enter
the IP address of your ISP’s Primary DNS Server. If a Secondary DNS Server address is
available, enter it also.
transmit DNS addresses to the router during login, select “Use these DNS servers” and enter
the IP address of your ISP’s Primary DNS Server. If a Secondary DNS Server address is
available, enter it also.
A DNS server is a host on the Internet that translates Internet names (such as www
addresses) to numeric IP addresses. Typically your ISP transfers the IP addresses of one or
two DNS servers to your router during login. If the ISP does not transfer an address, you
must obtain it from the ISP and enter it manually here. If you enter an address here, you
should reboot your PCs after configuring the router.
addresses) to numeric IP addresses. Typically your ISP transfers the IP addresses of one or
two DNS servers to your router during login. If the ISP does not transfer an address, you
must obtain it from the ISP and enter it manually here. If you enter an address here, you
should reboot your PCs after configuring the router.
4.
Click on Apply, then proceed to
.
Manual Configuration
using these
steps:
1.
Select whether your Internet connection requires a login.
Select ‘Yes’ if you normally must launch a login program such as Enternet or WinPOET in
order to access the Internet.
order to access the Internet.
2.
Enter your Account Name (may also be called Host Name) and Domain Name. These
parameters may be necessary to access your ISP’s services such as mail or news servers.
parameters may be necessary to access your ISP’s services such as mail or news servers.
3.
(If displayed) Enter the PPPoE login user name and password provided by your ISP. These
fields are case sensitive. If you wish to change the login timeout, enter a new value in minutes.
fields are case sensitive. If you wish to change the login timeout, enter a new value in minutes.
Note:
You will no longer need to launch the ISP’s login program on your PC in order to
access the Internet. When you start an Internet application, your router will automatically log
you in.
you in.
4.
Internet IP Address: If your ISP has assigned you a permanent, fixed (static) IP address for
your PC our router, select “Use static IP address”. Enter the IP address that your router has
been assigned. Also enter the netmask and the Gateway IP address. The Gateway is the ISP’s
router to which your router will connect.
your PC our router, select “Use static IP address”. Enter the IP address that your router has
been assigned. Also enter the netmask and the Gateway IP address. The Gateway is the ISP’s
router to which your router will connect.