Netgear wgr101 参照マニュアル

3-4

Connecting the Router to the Internet

These instructions assume the following:

•

You will connect the WGR101 wireless travel router to an RJ45 wall port in the office or hotel, 
or a broadband router at home

•

You will not use wireless WEP security

•

One or more wireless computers will connect to the WGR101 wireless travel router. 

Use WEP (

) to protect sensitive data. 

a.

Connect an Ethernet cable to the port on the WGR101 wireless travel router. If you are 
traveling, connect the other end of the cable to an RJ45 port in the wall. If you are home or 
in an office, connect the other end of the cable to a switch, router, or cable modem with a 
broadband Internet connection. 

b.

The WGR101 wireless travel router ships with the switch in position 1 for a single user. If 
multiple computers will use the wireless travel router, change the switch position to 2.

c.

Connect the power cord to the WGR101 and plug it into an outlet. The Power LED lights 
up. The WGR101 automatically broadcasts a wireless signal.

a.

On your computer, set NETGEAR-TRAVEL as the SSID for each computer that will use 
the WGR101. 

Tip: If you are typing the SSID, note that it is case sensitive and must match the WGR101 
SSID exactly. 

b.

The Wireless LED on the WGR101 is on when a wireless connection is available. This 
LED flashes during data transfer.