Netgear wgr101 参照マニュアル

Wireless Configuration

4-7

The WGR101 default factory settings are shown below. You can restore these defaults by pressing 
and holding the Factory Default Restore button on the rear panel for 10 seconds. After you install 
the WGR101 wireless travel router, use the procedures below to customize any of the settings to 
better meet your networking needs.

Follow the instructions below to set up and test basic wireless connectivity. Once you have 
established basic wireless connectivity, you can enable security settings appropriate to your needs.

1.

Log in to the WGR101 at its default LAN address of 

 with its default user 

name of admin and default password of password, or using whatever LAN address and 
password you have set up.

2.

Click Wireless Settings in the main menu of the WGR101.

3.

Choose a suitable descriptive name for the wireless network name (SSID). In the SSID box, 
enter a value of up to 32 alphanumeric characters. The default SSID is NETGEAR-TRAVEL.

Wireless Access Point

Wireless Access List (MAC Filtering)

SSID broadcast 

SSID 

11b/g RF Channel

Mode

Authentication Type

WEP

If you use a wireless computer to configure wireless settings, you will be 

disconnected when you click Apply. Reconfigure your wireless adapter to match the 
new settings or access the wireless travel router from a wired computer to make any 
further changes.