Netgear wgr101 参照マニュアル

4-10

Wireless Configuration

5.

You can manually or automatically program the four data encryption keys. These values must 
be identical on all computers and Access Points in your network.

•

Automatic - Enter a word or group of printable characters in the Passphrase box and click 
the Generate button. The passphrase is case sensitive; NETGEAR-TRAVEL is not the 
same as nETgear. The four key boxes will be automatically populated with key values.

•

Manual - Enter ten hexadecimal digits (any combination of 0-9, a-f, or A-F). These entries 
are not case sensitive; AA is the same as aa.

 

Select which of the four keys will be active. Wireless client must also select the key 
number.

Please refer to 

 for a full explanation of each of these 

options, as defined by the IEEE 802.11 wireless communication standard.

6.

Click Apply to save your settings.

To restrict access based on MAC Addresses, follow these steps:

1.

Log in to the WGR101 at its default LAN address of 

 with its default user 

name of admin and default password of password, or using whatever LAN address and 
password you have set up.

2.

Open the Wireless Settings menu of the WGR101.

3.

Click Wireless Station Access List to display the Wireless Card Access menu shown below.

When configuring the WGR101 from a wireless computer whose MAC address is 

not in the Trusted PC list, if you select Turn Access Control On, you will lose your 
wireless connection when you click on Apply. You must then access the wireless travel 
router from a wired computer or from a wireless computer which is on the access control 
list to make any further changes.