Netgear wgr101 参照マニュアル

5-8

Management

To save your settings, click Backup. Your browser will extract the configuration file from the 
router and will prompt you for a location on your computer to store the file. You can give the file a 
meaningful name at this time, such as pacbell.cfg. The default file name is netgear.cfg

To restore your settings from a saved configuration file, enter the full path to the file on your 
computer or click the Browse button to browse to the file. When you have located it, click the 
Restore button to send the file to the router. The router will then reboot automatically.

It is sometimes desirable to restore the router to the factory default settings. 

To restore the factory default configuration settings without knowing the login password or IP 
address, you must use the Default Reset button on the rear panel of the router. See 

.

The default password for the router’s Web Configuration Manager is password. NETGEAR 
recommends that you change this password to a more secure password. 

From the Main Menu of the browser interface, under the Maintenance heading, select Set 
Password to bring up the menu shown below.

To change the password, first enter the old password, and then enter the new password twice. Click 
Apply.