Netgear WNR2000 ユーザーガイド

Safeguarding Your Network

2-13

•

Enable WMM. Clear this check box to disable WMM. WMM (Wireless Multimedia), a 
subset of the 802.11e standard, allows wireless traffic to have a range of priorities, 
depending on the kind of data. Time-dependent information, like video or audio, will have 
a higher priority than normal traffic. For WMM to function correctly, Wireless clients 
must also support WMM.

•

Fragmentation Threshold, CTS/RTS Threshold, and Preamble Mode. The 
Fragmentation Threshold, CTS/RTS Threshold, and Preamble Mode options are reserved 
for wireless testing and advanced configuration only. Do not change these settings.

•

WPS Settings. For information about these settings, see the section, 

. 

•

Wireless Card Access List. For information about this list, see 

.

If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure 
the router’s network name (SSID) and security settings and, at the same time, connect a wireless 
client securely and easily to the router. Look for the 

 symbol on your client device. WPS 

automatically configures the network name (SSID) and wireless security settings for the router (if 
the router is in its default state) and broadcasts these settings to the wireless client. 

When you add wireless clients, whether or not they are WPS enabled, the added devices must 
share the same network name (SSID) and security passphrase. For more information, see 

The WNR2000 router provides two methods for connecting to a wireless client that supports WPS, 
described in the following sections: 

Note: NETGEAR’s Push 'N' Connect feature is based on the Wi-Fi Protected Setup 

(WPS) standard (for more information, see 

). All other Wi-Fi-

certified and WPS-capable products should be compatible with NETGEAR 
products that implement Push 'N' Connect.

Note: If you choose to use WPS, the only security methods supported are WPA-PSK and 

WPA2-PSK. WEP security is not supported by WPS.