Mitsubishi pd-5030 ユーザーズマニュアル

22

Select whether to set the input of the 5 BNC connectors to
RGB or component.
Example: Set the BNC INPUT mode to “COMP.”

1. On the MAIN MENU, select “OPTION1”, then press

the MENU/ENTER button.
The “OPTION1” screen appears.

2. Use the 

▲ and ▼ buttons to select “BNC INPUT”.

3. To set the BNC INPUT mode to “COMP.”...

Use the 

 and 

 buttons to select “COMP.”.

The mode switches as follows each time the 

 or 

button is pressed:

RGB ↔ COMP.

 BNC INPUT Settings
RGB ......... Use the 5BNC terminals for RGB input.
COMP. ...... Use the 3BNC terminals for component

input.

 Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

Example: Setting the “RGB SELECT” mode to
“MOTION ”

1. On the MAIN MENU, select “OPTION1”, then press

the MENU/ENTER button.
The “OPTION1” screen appears.

2. Use the 

▲ and ▼ buttons to select “RGB SELECT”.

3. To set the RGB select mode to “MOTION” ...

Use the 

 and 

 buttons to select “MOTION”.

The mode switches as follows each time the 

 or 

button is pressed:

→ AUTO ↔ STILL ↔ MOTION ↔ WIDE1 ↔ WIDE2 ↔ DTV ←