Mitsubishi pd-5030 ユーザーズマニュアル

20

Setting the AUDIO 1, 2, and 3 connectors to the desired
input.
Example: Setting “AUDIO INPUT1” to “VIDEO 2”

1. On the MAIN MENU, select “AUDIO SETTINGS”,

then press the MENU/ENTER button.
The “AUDIO SETTINGS” screen appears.

2. Use the 

▲ and ▼ buttons to select “AUDIO INPUT1”.

3. To set the AUDIO INPUT1 to “VIDEO2”...

Use the 

 and 

 buttons to select “VIDEO2”.

The mode switches as follows each time the 

 or 

button is pressed:
The available sources depend on the setting of “BNC
INPUT”.

RGB:

COMP.:

 AUDIO INPUT
A single audio input cannot be selected as the audio
channel for more than one input terminal.

 Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

→ 

VIDEO1 ↔ 

 

VIDEO2 ↔ 

 

VIDEO3 ↔ HD/DVD1

←

 

→

MONLINK ↔RGB2  ↔RGB1 

 ←

→ 

VIDEO1 ↔ 

 

VIDEO2  ↔ 

 

VIDEO3↔ HD/DVD1

←

 

→

MONLINK ↔RGB1  ↔HD/DVD2 

 ←

The position of the image can be adjusted and flickering
of the image can be corrected.
Example: Adjusting the vertical position in the
NARROW mode

1. On the MAIN MENU, select “MONITOR

SETTINGS”, then press the MENU/ENTER button.

The “MONITOR SETTINGS” menu appears.

(only for RGB/PC setting)

* The settings on the MONITOR SETTINGS menu are

not preset at the factory.

To select a mode ...
Use the 

 and 

 buttons to select a mode.

The mode switches as follows each time the 

 or 

button is pressed:

NARROW ↔ STANDARD

* The mode can also be switched by pressing the

FORMAT button on the remote control.

2. To adjust the vertical position ...

Use the 

▲ and ▼ buttons to select “V-POSITION”.

3. Adjust using the 

 and 

 buttons.

* If neither the 

 or 

 button is pressed within 5 seconds,

the current setting is stored into memory and the previous
screen reappears.

To continue making other computer image
adjustments ...
Repeat from step 2.