Mitsubishi pd-5030 ユーザーズマニュアル

27

Setting the time for INVERSE/WHITE

Set a time duration.
Example: Set the INVERSE mode to start in 2 hours
and proceed for one and a half hours.

1. On the Main Menu, select “OPTION 2”, then press the

MENU/ENTER button. The “OPTION 2” screen
appears.

2. Use the 

▲ and ▼ buttons to select “LONG LIFE”, then

press the MENU/ENTER button.
The “LONG LIFE” screen appears.

3. Use the 

▲ and ▼ buttons to select “INVERSE”.

4. Use the 

䊴

 and 

䊳

 buttons to select “ON”, then press the

MENU/ENTER button.
The “INVERSE/WHITE” screen appears.

5. Adjust the time using the 

▲▼

䊴

 and 

䊳

 buttons.

The mode switches as follows each time the 

䊴

 or 

䊳

button is pressed:
• WORKING TIME

→ON  ↔ 00H03M  ↔ 00H06M ↔ ..... ↔ 12H42M ↔ 12H45M←

• WAITING TIME

→00H03M  ↔ 00H06M  ↔ 00H09M ↔ ... ↔ 12H42M ↔ 12H45M←

←−−−−

      2 H       

−−−−→←−−

    1.5 H   

−−→←−−−−

Start

INVERSE/WHITE Start STAND BY

䡵 Setting the time
WORKING TIME ..... Set the time duration for

“INVERSE/WHITE”.
When the WORKING TIME is set
to “ON” the mode will stay on.

WAITING TIME ...... Set the standby time until the

“INVERSE/WHITE” mode starts.

* The “WAITING TIME” can not be set when the

“WORKING TIME” is ON.

* The “WORKING TIME” and “WAITING TIME” can

be set for up to 12 hours and 45 minutes in units of 3
minutes.

* At the completion of a WORKING TIME function, the

monitor will enter STANDBY mode.

[Example]
WORKING TIME: 01H30M
WAITING TIME: 02H00M

䡵 To select “ON” for the “WORKING TIME”...
Set the hours of the working time to 0H and the minutes
to 0M. “ON” will be displayed.

䡵 INVERSE Settings
ON ......... The picture is displayed alternately between

positive image and negative image.
You can set the time by pressing the MENU/
ENTER button while “ON” is set.

OFF ....... Inverse mode does not function.
WHITE ...The entire screen turns white.

You can set the time by pressing the MENU/
ENTER button while “ON” is set.