Mitsubishi pd-5030 ユーザーズマニュアル

29

Choose the signal for the DVI connector (PC or STB/
DVD) and set the black level.
Example: Setting the “PLUG/PLAY” mode to “STB/
DVD”

1. On the MAIN MENU, select “OPTION2”, then press

the MENU/ENTER button.
The “OPTION2” screen appears.

2. Use the 

▲ and ▼ buttons to select “DVI SET UP”,

then press the MENU/ENTER button.
The “DVI SET UP” screen appears.

3. To set PLUG/PLAY mode to “STB/DVD”...

Use the 

䊴

 and 

䊳

 buttons to select “STB/DVD”.

The mode switches as follows each time the 

䊴

 or 

䊳

button is pressed:
PLUG/PLAY:

PC ↔ STB/DVD

BLACK LEVEL:

LOW ↔ HIGH

䡵 PLUG/PLAY settings
PC .............. When connected to the PC signal.

STB/DVD .... When connected to the SET TOP BOX,

DVD etc.

䡵 BLACK LEVEL settings
LOW ........... When connected to the PC signal.
HIGH .......... When connected to the SET TOP BOX,

DVD etc. Change “HIGH” into “LOW”
if the black level appears gray.

䡵 S1/S2 settings
AUTO .....Adjusts the screen size automatically

according to the S1/S2 video signal.

OFF ....... Turns the S1/S2 function off.

䡵 Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.