Champion 1536-n 仕様ガイド
T
HE
M
ODEL
1536-N
Specifications: Since our policy is one of continuous improvement, we reserve the right to change
specifications at any time and without notice, or modify these to suit manufacturing processes.
Please refer to our current Specification Data Sheet
MACHINE CONSTRUCTION: 12, 14, & 16 gauge STAINLESS
STEEL. All seams Heliarc welded.
STEEL. All seams Heliarc welded.
DOOR: Double skinned STAINLESS STEEL with exterior latch and
inside release handle.
inside release handle.
ROTATING WASH HUB & SPRAY ARM ASSEMBLY: Water
driven, STAINLESS STEEL spray arm assembly with STAINLESS
STEEL jets, removable end caps and hand operated quick release
mechanism for easy cleaning and reassembly. Mounted on
STAINLESS STEEL base.
driven, STAINLESS STEEL spray arm assembly with STAINLESS
STEEL jets, removable end caps and hand operated quick release
mechanism for easy cleaning and reassembly. Mounted on
STAINLESS STEEL base.
FILTER: Perforated STAINLESS STEEL removable screen.
WATER PUMP: 15 H.P., 208/240/480 volt, 3 phase, 60 cycle with
output of 250 gallons per minute at 35 to 45 P.S.I.
output of 250 gallons per minute at 35 to 45 P.S.I.
DIGITAL CONTROL & INFORMATION CENTER: 110 volt con-
trol circuit with push pad operation of “POWER ON”, “STOP” and
trol circuit with push pad operation of “POWER ON”, “STOP” and
“SHORT, MEDIUM or LONG WASH CYCLES”. A digital display indi-
cates “TIME REMAINING” for each cycle. LED’s indicate wash, rinse
and unload functions. A buzzer is also included to provide an
audible indication of time to unload. A programmable controller
allows the push pad to be used as a “DIAGNOSTIC CENTER” by
displaying “ERROR CODES” for ease of troubleshooting.
cates “TIME REMAINING” for each cycle. LED’s indicate wash, rinse
and unload functions. A buzzer is also included to provide an
audible indication of time to unload. A programmable controller
allows the push pad to be used as a “DIAGNOSTIC CENTER” by
displaying “ERROR CODES” for ease of troubleshooting.
GAUGES: Special moisture resistant design. Wash temperature,
rinse temperature, wash jet pressure.
rinse temperature, wash jet pressure.
WASH TANK: STAINLESS STEEL with electric, infrared gas, steam
or steam coil heating, thermostatically controlled, low water pro-
tected, sloped to drain with a 72-gallon capacity.
or steam coil heating, thermostatically controlled, low water pro-
tected, sloped to drain with a 72-gallon capacity.
BOOSTER HEATER: Electric, infrared gas or steam coil heating to
provide 180°/190° hot sanitizing rinse.
provide 180°/190° hot sanitizing rinse.
RACKS: STAINLESS STEEL rod built to match specific washing
requirements.
requirements.
Additional Rackwasher Models:
3/00 (3M)
Champion Industries, Inc.
P.O. Box 4149
Winston-Salem, NC 27115
336/661-1556
Fax: 336/661-1979
www.championindustries.com
P.O. Box 4149
Winston-Salem, NC 27115
336/661-1556
Fax: 336/661-1979
www.championindustries.com
1527
2048
2054
3060