Champion 1536-n 仕様ガイド
SPECIFICATIONS
MODEL 1536-N
POT, PAN & UTENSIL WASHER
WASHER
Automatic washing machine designed to wash and sanitize items commonly used in the
bakery, meat, poultry, candy and food service industries. Machine is designed to be
installed in a pit or used at floor level with a ramping system.
bakery, meat, poultry, candy and food service industries. Machine is designed to be
installed in a pit or used at floor level with a ramping system.
CABINET
60" wide x 56-1/2" deep x 93" high. Clearance height: 123" (129-1/2" with optional
infrared rinse tank). Standard door opening: 32" wide x 76-1/2" high. Wash chamber:
32" wide x 38-1/2" deep x 76-1/2" high. Constructed of 12, 14 & 16 gauge, type 304
#3 finish, STAINLESS STEEL . All seams tig-welded, cleaned and polished.
infrared rinse tank). Standard door opening: 32" wide x 76-1/2" high. Wash chamber:
32" wide x 38-1/2" deep x 76-1/2" high. Constructed of 12, 14 & 16 gauge, type 304
#3 finish, STAINLESS STEEL . All seams tig-welded, cleaned and polished.
DOOR
Right hand or left hand swing constructed of 14 and 16 gauge, type 304 #3, STAINLESS
STEEL with integral STAINLESS STEEL framework. Door double skinned for added
strength with Heliarc welded seams. Equipped with door latch and inside release handle.
Door is interlocked with limit switch to prevent machine operation while open.
STEEL with integral STAINLESS STEEL framework. Door double skinned for added
strength with Heliarc welded seams. Equipped with door latch and inside release handle.
Door is interlocked with limit switch to prevent machine operation while open.
WASHER FLOOR
Floor constructed of 12 gauge STAINLESS STEEL formed sheets to provide maximum
strength. Floor supports constructed of 2" x 2" x 1/4" STAINLESS STEEL angle.
strength. Floor supports constructed of 2" x 2" x 1/4" STAINLESS STEEL angle.
RECIRCULATING
Heated by 208/240 or 480 volt electric immersion heaters, 18 KW total, thermostatically
WASH TANK
controlled wash temperature with low water protection system. 90 gallon capacity
(79 gallons if infrared heated), 14 gauge STAINLESS STEEL, sloped to drain.
Infrared gas and steam heating options available.
(79 gallons if infrared heated), 14 gauge STAINLESS STEEL, sloped to drain.
Infrared gas and steam heating options available.
FILTERS
Perforated, STAINLESS STEEL screen type. Double filter system for increased
effectiveness and easy cleaning without emptying wash tank.
effectiveness and easy cleaning without emptying wash tank.
FILL VALVE
Size 1/2" brass material, solenoid type for automatic.
DRAIN VALVE
Size 2" brass material, gate type for manual or electrically operated ball valve for
automatic option.
automatic option.
WASH PUMP
15 hp, 208/240 or 480 volt, 3 phase, 60 cycle. Close coupled; 250 gallons per minute
at 35 to 45 psi, mounted on 12 gauge STAINLESS STEEL formed channel base.
at 35 to 45 psi, mounted on 12 gauge STAINLESS STEEL formed channel base.
ROTATING WASH
Water-driven STAINLESS STEEL spray arm assembly with STAINLESS STEEL jets,
HUB & SPRAY ARM
removable end caps and hand-operated, quick-release mechanism for easy cleaning and
ASSEMBLY
reassembly. Mounted on STAINLESS STEEL base.
SANITIZING
STAINLESS STEEL, 20 gallon capacity, with 208/240 or 480 volt electric booster
RINSE TANK
heaters 18 KW total, to provide 180
°/190° F hot sanitizing rinse. Uses 12 gallons per
30 second cycle. Infrared gas and steam heating options available, as well as pumped
rinse system
rinse system
RINSE VALVE
Size 1" brass material, solenoid type, automatic.
FINAL RINSE
Type 304 STAINLESS STEEL tubing with brass compression fittings and brass
PIPING
or optional STAINLESS STEEL full cone rinse jets.
Rev: 5/8/00