Champion pp-3 ユーザーズマニュアル
C O N T R O L P A N E L S
14
Mylar Indicator Lights
Basic Operation
When you first power up to use your wash tank, the display will show fil, fill the wash tank
to the water fill line (see the INITIAL START UP section).
to the water fill line (see the INITIAL START UP section).
Once the tank has been filled, press the Start/Stop button to start the continuous wash cycle.
Soap will be dispensed automatically into the wash tank.
Soap will be dispensed automatically into the wash tank.
During the wash operation, the display will show current water temperature and the heater
light will cycle on and off as the heater is maintaining the preset water temperature.
light will cycle on and off as the heater is maintaining the preset water temperature.
The Start/Stop button can be used to toggle on and off the circulation pumps. During a
pause state, the heater is still in operation and maintaining the water temperature.
pause state, the heater is still in operation and maintaining the water temperature.
After a certain amount of time, the water is considered dirty and the circulation pumps will
turn off, the display will show drn, and the change water indicator light will flash.
turn off, the display will show drn, and the change water indicator light will flash.
Note
: Pressing the down arrow key will display the time remaining before a water change is required.
After the water has been drained, the display will show fil. You are now ready to start
another wash cycle.
another wash cycle.
The heater light will illuminate whenever the wash
tank’s heater is powered on.
The alarm light will illuminate whenever an alarm has
occurred.
The change water indicator light will flash when it is
time to change water. The display will show drn.
The soap indicator light will illuminate whenever the
soap pump is powered on.