Marantz ud9004 ユーザーガイド
Troubl
eshooting
Information
HDMI
Control
Function
Pl
ayback
Connections
Getting Started
Specifications
26
ENGLISH
HDMI Setup
Setting items
Setting contents
SA-CD Audio Out
Set to output stereo/multi
area audio of Super Audio
CD to the HDMI terminal.
Set to output stereo/multi
area audio of Super Audio
CD to the HDMI terminal.
On : Super Audio CD audio is output.
Off : Super Audio CD audio is not output.
The Super Audio CD audio signal is a 44.1 kHz/16-bit Linear PCM output.
HDMI Control
Can operate the unit in
conjunction with an HDMI
control support device.
Can operate the unit in
conjunction with an HDMI
control support device.
G
ControlH
Off
•
: Disable the HDMI control function.
HDMI1 On :
•
Link with the device connected to HDMI1.
HDMI2 On :
•
Link with the device connected to HDMI2.
G
Power Off ControlH
On
•
: Turns the UD9004’s power to standby through linkage to the TV.
Off :
•
Does not turn the UD9004's power to standby through linkage to
the TV.
For the HDMI control function to operate, it is necessary for the UD9004
•
or HDMI-compatible TV connected to the UD9004 to have an HDMI
connection.
Refer to “HDMI Control Function” (
connection.
Refer to “HDMI Control Function” (
•
v
page 49) for more information
about the HDMI control function.
After the “HDMI Control” setting has been changed, always turn off the
After the “HDMI Control” setting has been changed, always turn off the
•
power to the connected equipment and then turn it back on.
Setting items
Setting contents
TV Aspect (Aspect ratio)
Set the screen type and
display mode of the TV.
Set the screen type and
display mode of the TV.
16:9 Squeeze Auto : Output to a wide screen TV. For 4:3 video, display in
the center of the screen without changing the aspect ratio.
WIDE (16:9) : Output to a wide screen TV.
the center of the screen without changing the aspect ratio.
WIDE (16:9) : Output to a wide screen TV.
4:3 PS : Output to a 4:3 TV. For wide video, trim the left and right side of
the image and display in 4:3 aspect ratio. z1
4:3 LB : Output to a 4:3 TV. Display all of the wide video. z2
the image and display in 4:3 aspect ratio. z1
4:3 LB : Output to a 4:3 TV. Display all of the wide video. z2
Component Resolution
Set the component output
resolution.
Set the component output
resolution.
480/576i, 480/576P, 720P, 1080i,
Source Direct : Output video using its source resolution. Convert the
1080p video source to 1080i.
1080p video source to 1080i.
Progressive Mode
Set an appropriate progressive
conversion mode for the
source video material.
Set an appropriate progressive
conversion mode for the
source video material.
Auto : Detect the type of video material and automatically switch the
mode. Normally, this setting is used.
Video1 : Suitable for playing video material discs.
mode. Normally, this setting is used.
Video1 : Suitable for playing video material discs.
Video2 : Suitable for playing video material discs or 30-frame film material
discs.
discs.
TV Active Area
Sets the horizontal display
range when the analog
video output resolution is
480i/576i.
Sets the horizontal display
range when the analog
video output resolution is
480i/576i.
Full : Set when a home-use monitor is connected.
Normal : This setting is used when video synchronization is disturbed on
a professional-use monitor.
a professional-use monitor.
This is not available for HDMI output.
z
1 :Depending on the video content, even though you set the 4:3 PS (Pan Scan), the content may be
output in 4:3 LB (Letter Box).
z
2 :Only valid for content recorded in 480i/576i.
Set the video output signal according to the connected TV.
Video Setup
Default settings are underlined.
Setup
Remote control operation
buttons
SET UP :
Displaying the menu
Cancel the menu
d f 0 1 :
Moves the cursor
(Up/Down/Left/Right)
ENTER
:Decision the setting
RETURN
:Return to previous menu