Pro-Team coachvac ユーザーガイド

EN

G

LI

SH

ProTeam Owner’s Manual  –  

Filter Maintenance

1.  Empty and inspect the filters every time you start and finish vacuuming (Figure R). Replace if  

necessary. A clogged and dirty filter restricts airflow and results in reduced suction and overheating.

2.  To replace the Intercept Micro Filter, slide the filter into Cloth Filter and secure into vacuum  

(Figure S).

3.  Once a month, or as necessary, hand or machine wash the cloth filter and let it line dry, do not put it

in the dryer (Figure T).

4.  Once a week, or as necessary, clean the Dome Filter.

a.  First, remove the Intercept Micro Filter and Cloth Filter. Reach into the vacuum body and twist

the Dome Filter from the motor (Figure U).

b.  Pull the top piece of the Dome Filter off and remove the foam media (Figure V). Shake it out,

rinse it and let it air dry thoroughly.

c.  Firmly snap the top piece of the Dome Filter into place (Figure U).

NOTE: If using a high filtration disc in place of the foam media, check it every two to three weeks.
When the disc becomes discolored, replace it with a new disc. The life of the high filtration disc will
depend greatly on the use and care of the Intercept Micro Filter and Cloth Filter.

5.  For the TailVac, every three months (or as necessary) take off the shroud assembly by removing the

two screws (Figure W). Clean the foam attached to the inside of the shroud.