Pro-Team govac bp ユーザーガイド
O P E R A T I O N
7
Figure F
6. Verify the charge level of the battery
pack by pressing the power level indicator
button on the inside of the pack (Figure F).
Five green lights indicate a fully charged
battery. Remove plug from wall outlet
after charging.
pack by pressing the power level indicator
button on the inside of the pack (Figure F).
Five green lights indicate a fully charged
battery. Remove plug from wall outlet
after charging.
Figure E
5. The left indicator light should turn Red
and remain lit. The right indicator light will
turn Yellow when charging and Green
when fully charged (Figure E). The battery
pack may require up to 3 hours to fully
charge.
and remain lit. The right indicator light will
turn Yellow when charging and Green
when fully charged (Figure E). The battery
pack may require up to 3 hours to fully
charge.
Figure D
4. Flip power switch on the charger to on
position (Figure D).
position (Figure D).
Figure C
3. Plug the charger’s power cord into 120
V wall outlet (Figure C).
V wall outlet (Figure C).
Figure B
2. Plug the charger cord into the battery
pack as shown (Figure B). A clicking noise
will indicate a correct connection.
pack as shown (Figure B). A clicking noise
will indicate a correct connection.
Figure A
1. Make sure the power switch on the
charger is in the off position and plug the
charger’s power cord into the charger
(Figure A).
charger is in the off position and plug the
charger’s power cord into the charger
(Figure A).
CHARGE BATTERY FIRST FOR OPTIMUM PERFORMANCE
PREPARING THE BATTERY PACK FOR CHARGING
*Battery pack may get warm while charging.