Rangemaster 110 ユーザーガイド
18
Lift the grill pan clear of the support frame.
The
support frame is held to the side rails by two clips on
each side.
each side.
For each side, support the side rail with one hand and
with the other hand lift the frame up and out of the
side clips.
with the other hand lift the frame up and out of the
side clips.
For safety, push the side rails back into the grill
chamber.
chamber.
The side rails can be removed to make cleaning the
grill chamber easer by unhooking them from the grill
chamber sides.
grill chamber easer by unhooking them from the grill
chamber sides.
Slides can be wiped clean with soft cloth and mild
detergent.
Do not use any abrasive substance.
DO NOT put the side runners in a dishwasher
detergent.
Do not use any abrasive substance.
DO NOT put the side runners in a dishwasher
When you have finished, hook the side rails back onto
the sides of the chamber. To refit the frame pull the
side rails forward and for each side in turn support
the side rail and press the frame down into the side
rails. Replace the grill pan.
the sides of the chamber. To refit the frame pull the
side rails forward and for each side in turn support
the side rail and press the frame down into the side
rails. Replace the grill pan.
Control Panel and Doors
Avoid using any abrasive cleaners including cream
cleaners, e.g. Cif, on brushed Stainless Steel surfaces.
For best results use a liquid detergent e.g. Domestos
Multi Surface Cleaner.
cleaners, e.g. Cif, on brushed Stainless Steel surfaces.
For best results use a liquid detergent e.g. Domestos
Multi Surface Cleaner.
The control panel and control knobs should only
be cleaned with a soft cloth wrung out in clean hot
soapy water. Wipe with a clean dampened cloth then
polish with a dry cloth. The oven doors should only
be cleaned with a soft cloth wrung out in clean hot
soapy water.
be cleaned with a soft cloth wrung out in clean hot
soapy water. Wipe with a clean dampened cloth then
polish with a dry cloth. The oven doors should only
be cleaned with a soft cloth wrung out in clean hot
soapy water.
Main Ovens
The main ovens have removable panels that have
been coated with a special enamel that partly cleans
itself. This does not stop all marks on the lining, but
helps to reduce the amount of manual cleaning
needed.
been coated with a special enamel that partly cleans
itself. This does not stop all marks on the lining, but
helps to reduce the amount of manual cleaning
needed.
The Cook & Clean panels work better above
200°C. If you do most of your cooking below this
temperature, occasionally remove the panels and
wipe with a lint free cloth and hot soapy water.
The panels should then be dried and replaced and
the oven heated at 200°C for about one hour. This
will ensure the Cook & Clean panels are working
effectively.
200°C. If you do most of your cooking below this
temperature, occasionally remove the panels and
wipe with a lint free cloth and hot soapy water.
The panels should then be dried and replaced and
the oven heated at 200°C for about one hour. This
will ensure the Cook & Clean panels are working
effectively.
Don’t use steel wool (Brillo) or any other materials
that will scratch the surface. Don’t use oven cleaning
pads.
that will scratch the surface. Don’t use oven cleaning
pads.
Removing the Main Oven Linings
Some of the lining panels can be removed for
cleaning and for cleaning behind. Remove the
shelves first.
cleaning and for cleaning behind. Remove the
shelves first.
The side panels of either oven can be removed.