Zhone 2000 ユーザーガイド
146
2 0 0 0 - A 2 - G B 2 3 - 0 0
Display NAT Local Server Table
When NAT is enabled, you can display the entries in the local server table.
1
To display the table, type “O” on the NAT Configuration menu.
2
Press any key to return to the NAT Configuration menu.
Display NAT Alias Table
When NAT is enabled, you can display the entries in the NAT alias table. To
display the table, type “E” on the NAT Configuration menu. Press any key to
display the table, type “E” on the NAT Configuration menu. Press any key to
return to the NAT Configuration menu.
Delete IP Address from NAT Tables
To delete an entry from the NAT Tables, follow the steps below.
1
Type “X” on the NAT Configuration menu. The IAD prompts for the IP
address.
2
Type the IP address to delete and press Enter. The IAD updates the table,
and displays the NAT Configuration menu.
Delete NAT Local Server Entry
To delete a local server entry, follow the steps below:
1
Type “Y” on the NAT Configuration menu. The IAD prompts for the entry
number to delete.
2
Type the number of the table entry and press Enter. The IAD displays the
following:
Deleting NAT Local Server entry 1, Translated IP address
115.3.3.1
Translated Port 2, Standard Port 3
The IAD updates the table, and displays the NAT Configuration menu.
Report Entry
Description
Entry
Table entry number
Local IP Address
IP address in use
Local Port
local port number
Internet Port
Internet port number
Protocol
The protocol used—TCP or UDP
Report Entry
Description
Entry number
Table entry number (1 to 7)
Local IP Address
Local, or LAN IP address
Internet IP Address
Internet IP address assigned