Zhone 2000 ユーザーガイド

Type the option corresponding to the IP address you want to use. The IAD 

displays the status of the DNS server assignment for the selected port, and 

prompts you to enable or disable it:

Type “E” to enable, or “D” to disable the DNS server assignment for T1/

E1 on this port. The IAD reports the change, displays the status of the DNS 

server assignment for the port, and prompts you to enable or disable it:

Type “E” to enable, or “D” to disable the IP mask assignment for T1/E1 on 

this port. The IAD transfers the IP address and mask assigned to a WAN 

port to a LAN port and then displays the ATM Service Category 

Configuration menu (Figure 4.33).

Type “1” to select CBR for high priority data

− or −

Type “2” to select UBR for low priority data. The IAD displays the Peak 

Cell Rate Configuration menu (Figure 4.34).

Type the PCR value or press Enter to set the PCR to the maximum rate for 

the current line speed. The IAD saves the configuration and displays the 

ATM PVC Configuration menu.

AAL1/CES Type “8” on the ATM Encapsulation Configuration menu Figure 4.32) to 

select AAL1/LES encapsulation. The IAD displays the Peak Cell Rate 
Configuration menu (Figure 4.34). Type the PCR value or press Enter to set 
the PCR to the maximum rate for the current line speed. The IAD saves the 
configuration and displays the ATM PVC Configuration menu.

AAL2/LES Type “9” on the ATM Encapsulation Configuration menu (Figure 4.32) to 

display the AAL2 Audio Profile Format menu.

To select ITU, type “1”. The IAD displays the AAL2 Audio Profile menu 

with available options. Type “2” for ATM Forum.

The IAD displays the Peak Cell Rate (PCR) Configuration menu (Figure 
4.34).

Type the PCR value or press Enter to set the PCR to the maximum rate for 

the current line speed. The IAD saves the configuration and displays the 

ATM PVC Configuration menu.

Type “A” for RFC 2516 (PPoE with LLC) or “B” for RFC 2516 (PPoE 

with VC mux.