Zhone 2000 ユーザーズマニュアル

- 55 -

Enter number of voice channels desired for this chunk:

Type the number of voice channels.

5. The IAD asks you for the starting channel:

Enter the starting channel of this voice channel 
chunk:

Type the starting channel number for this chunk of circuits.

6. The IAD asks if you want to allocate more circuits:

Do you want to continue allocating new chunks?[y/n]:

7. Type Y to repeat these steps, or N to continue.
8. The IAD asks you for the number of data channels to allocate:

Enter the number of data channels desired:

Type the number of voice channels.

9. The IAD asks you for the starting channel:

Enter starting channel of this voice channel chunk:

Type the starting channel number for this chunk of circuits.

10. The IAD asks if you want to allocate more circuits:

Do you want to continue allocating new chunks?[y/n]:

11. Type Y to repeat these steps, or N to continue.
12. The IAD asks you to select the signaling protocol for voice:

Enter the signaling protocol on voice channels:

1. Loop Start

2. Ground Start (Opt. Selection-Not Implemented)

3. Immediate Start (Opt. Selection-Not Implemented)

4. Wink Start (Opt. Selection-Not Implemented)

Enter Selection:

Type the option for the signaling protocol and press Enter.

13. If you assigned one or more data channels, the IAD asks you to select 

the datalink protocol for those channels:
Enter the protocol on the selected data channels:

6. ATM

7. Frame Relay

Enter Selection:

Type 6 for ATM or 7 for Frame Relay.

14. The IAD displays the current datalink protocol, saves the selection and 

displays the current channel settings. Press Escape to return to the 
menu and continue WAN configuration.

On all IADs except the JF2100 series, the WAN interface is fixed. On 
JF2100 IADs, you may select G.SHDSL or SDSL as the interface.

LAN LINK

LAN ACT

WAN LINK

VOICE

POWER

This section is for selecting either G.SHDSL or SDSL as the 
WAN interface on the JF2104, JF2104i and JF2108.