Zhone 2000 ユーザーズマニュアル

- 65 -

Type the option corresponding to the ATM standard.

6. The IAD sets the standard you select and displays the menu.
7. Reset the IAD (page

) when you finish WAN configuration.

To determine the WAN interface setting, or to switch the WAN interface for 
use in a T1 (North American) or E1 environment, type 5 (Configure WAN) 
on the Main menu to display the WAN Configuration menu for T1/E. 

1. Type 2 to select Configure Physical Interface.
2. The IAD displays the T1 (

) or E1 Configuration menu 

(

), depending on how your IAD is configured:

 

Option D—ADSL Debug Messages—is reserved for 
Paradyne network engineers.

LAN LINK

LAN ACT

WAN LINK

VOICE

POWER

This section is for configuring the IAD to use the T1 or E1 
WAN interface on the JF2208 or JF2216 IAD.

*****************************************

WAN Configuration Menu

*****************************************

Configuring T1/E1

1. Configure Datalink Protocol
2. Configure Physical Interface
3. Configure PVCs
4. Configure ATM Options

*******************************************

T1 Configuration Menu

*******************************************

1. Select Frame Mode (D4 or ESF)
2. Select Transmit Line Build Out
4. Select B8ZS or AMI
5. Configure Loopback
6. Configure Transmit Channels
7. Configure Receive Channels
8. Configure Transmit Clock Source
9. Change to E1 Mode