Zhone 5100 参照マニュアル
APPENDIX A
FTP loader commands
FTP loader commands
A-18
Vpacket 5100/6100 Series Reference Manual
Setting the path to the FTP server
You need to set the path to the FTP server before downloading code. You can set the path by
issuing the set ftp path command.
Syntax: set ftp path [pathname]
Argument:
Syntax: set ftp path [pathname]
Argument:
pathname the path to the stored code that is located on a local or remote FTP server
Example:
In this example, the FTP path is set to the local directory c: and folder named seahorse_code.
Setting the IP address of the FTP server
You need to set the FTP server address before downloading a new software image. You can set
the IP address of the FTP server by issuing the set ftp server command.
Syntax: set ftp server [ip addr]
Argument:
Syntax: set ftp server [ip addr]
Argument:
ip addr
Example:
In this example, the local FTP server address is set to 10.10.10.3 255.255.255.0. You need to save
and reset the 5100/6100 VDR.
FtpLoader(17)> set ftp path c:\seahorse_code
Save and Reboot for changes to take effect
FtpLoader(18)>
FtpLoader(18)> set ftp server 10.10.10.3 255.255.255.0
Save and Reboot for changes to take effect
FtpLoader(19)>