Zhone 5100 참조 매뉴얼

APPENDIX A
FTP loader commands

You need to set the path to the FTP server before downloading code. You can set the path by 

issuing the set ftp path command.
Syntax: set ftp path [pathname]
Argument:

pathname the path to the stored code that is located on a local or remote FTP server

Example:

In this example, the FTP path is set to the local directory c: and folder named seahorse_code.

You need to set the FTP server address before downloading a new software image. You can set 

the IP address of the FTP server by issuing the set ftp server command.
Syntax: set ftp server [ip addr]
Argument: 

ip addr

Example:

In this example, the local FTP server address is set to 10.10.10.3 255.255.255.0. You need to save 

and reset the 5100/6100 VDR.

FtpLoader(17)> set ftp path c:\seahorse_code

Save and Reboot for changes to take effect

FtpLoader(18)>

FtpLoader(18)> set ftp server 10.10.10.3 255.255.255.0

Save and Reboot for changes to take effect

FtpLoader(19)>