Zhone 5100 参照マニュアル
CHAPTER 1
System commands
System commands
12
Vpacket 5100/6100 Series Reference Manual
Setting sleep
You can force the 5100/6100 VDR to sleep for a defined number of seconds by issuing the sleep
command.
Caution. If the time you enter is too long for your needs, you must power cycle the
5100/6100 VDR to escape.
Syntax: sleep <number of seconds>
Argument:
Argument:
number of seconds
the amount of time you want the 5100/6100 VDR CLI; to
escape you have to hard boot the 5100/6100 VDR
Example:
In this example, the 5100/6100 VDR is set to sleep for 60 seconds. When it comes back online a
“wake up” message appears.
“wake up” message appears.
Viewing who is logged in
You can view who is logged in and by what means they are connected to the 5100/6100 VDR by
issuing the who command.
Syntax: who
Example:
Syntax: who
Example:
In this example, this table shows that one active console session is in progress and that the user is
an admin. A second user is logged in from IP address 172.16.1.231.
VPacket# sleep 60
Going to sleep for 60 seconds.
Wake up!
VPacket# who
internal Console
admin Console
user 172.16.1.231
VPacket#
!