Zhone 5100 参考手册

CHAPTER 1
System commands

You can force the 5100/6100 VDR to sleep for a defined number of seconds by issuing the sleep 

command. 

Caution. If the time you enter is too long for your needs, you must power cycle the 

5100/6100 VDR to escape.

Syntax: sleep <number of seconds>
Argument:

number of seconds

the amount of time you want the 5100/6100 VDR CLI; to 

escape you have to hard boot the 5100/6100 VDR

Example:

In this example, the 5100/6100 VDR is set to sleep for 60 seconds. When it comes back online a 
“wake up” message appears.

You can view who is logged in and by what means they are connected to the 5100/6100 VDR by 

issuing the who command.
Syntax: who
Example:

In this example, this table shows that one active console session is in progress and that the user is 

an admin. A second user is logged in from IP address 172.16.1.231.

VPacket# sleep 60

Going to sleep for 60 seconds.

Wake up!

VPacket# who

internal            Console

admin               Console

user                172.16.1.231

VPacket#

!