Zhone 5100 参照マニュアル
System level general commands
Vpacket 5100/6100 Series Reference Manual
13
!x and !! to execute past commands
These two shortcut commands can be used in conjunction with the history command to force the
execution of specific commands. !! forces execution of the last action in the history list and !
accompanied by a command number from the history list executes the specified command. Both
commands are valid for the current active session.
Syntax: !<x>
Argument:
Syntax: !<x>
Argument:
x
is the number of the command as shown in the command history list
Example:
In this example, !7 forces execution of command number 7 in the history list, which in this case
was show ip.
VPacket# !7
VPacket# show ip
ACTIVE indicates this is the current operational setting
CONFIG indicates this has been configured but not activated
-------------------------IP INTERFACE----------------------
INTERFACE NAME IP ADDRESS NET MASK
ACTIVE ethernet 10.10.10.254 255.255.255.0
CONFIG wan 205.176.94.11 255.255.255.0
CONFIG Default Gateway 10.10.10.254
ACTIVE Voice Ip Address 205.176.94.11
-----------------------------------------------------------
VPacket#