Zhone 6382 ユーザーズマニュアル

3. Using the Web Interface

To set up LAN and WAN options not available on the Quick Start screens, select 
Setup from the Home page. 

 shows the Setup page. The menu is 

broken into two sections: the WAN configuration and the LAN configuration.

 

The DSL (LINE) connection is the Wide Area Network (WAN) connection. It is also 
referred to as a broadband connection. The requirements for the WAN connection 
depend on your Internet Service Provider (ISP). Most of the configuration you will 
perform will be in this area. 

On the other side of your router are your own Local Area Network (LAN) 
connections. This is where you plug in your local computers to the router. The 
router is normally configured to automatically provide all the PCs on your network 
with Internet addresses. 

If you connected a PC (rather than a hub or a switch) directly to the router, your 
LAN consists of that PC. 

Note that the Apply button temporarily saves changes you make. To make 
changes permanent, click on Tools (at the top of the page) and select System 
Commands. At the System Commands page, click on Save All.