Zhone 5100 ユーザーガイド

Installation and Setup

5100-A2-GB21-00

November 1996

You can set the line speed to match your RADSL or ADSL card using the
Diagnostic Utility. Be sure you know the appropriate line speed for your card
before using this selection or contact your customer service representative
for assistance. Selecting the wrong speed can terminate your DSL link.

To change line speed:

1. Select Configuration from the HotWire 

main menu.

2. Select Hardware Setup.

The Hardware Setup window appears.

3. Select Advanced. The screen expands 

and the Advanced button changes to 
Basic.

4. Select the appropriate Transmit and 

Receive speeds for your card.

If necessary, use 

 to scroll the display. 

The setting for the speed in this window 
must match the speed for the card.

For RADSL cards, it is highly 
recommended that the Trasmit and 
Receive rates remain at the maximum 
rate possible. This enables the software 
to use the highest rate available as the 
operating rate when the central office 
card and your DSL card speeds do not 
match.

5. Click on one of the following:

— Save Speed to save the selected transmit and receive speeds and return

to the hardware setup window.

— Basic to close the Link Speed window without changes and return to the

hardware setup window.

Unlike other hardware setup selections, you do not need to return to the File
option on the main menu and perform the save operation for this setting. The
Save Speed function in the Link Speed window saves the transmit and
receive speeds as required.