Zhone 5620 インストール手順
15
Increasing the Number of End-User Systems
A single end-user system is attached to the Hotwire 5620 RTU by using an Ethernet
crossover cable. To increase the number of end-user systems, connect all end-user
systems to an Ethernet hub using a straight-through cable. See
crossover cable. To increase the number of end-user systems, connect all end-user
systems to an Ethernet hub using a straight-through cable. See
The Hotwire 5620 RTU can support up to 32 end-user systems. Verify any changes with
the service provider.
the service provider.
Cables & Connectors
This section is reference information.
Use standard twisted-pair CAT3 or better cables.
DSL interface connector uses a 6-pin,
non-keyed modular plug.
non-keyed modular plug.
RJ11 6-Pin Connector
Pin # Function
1 & 2
Not used
3
DSL Ring
4
DSL Tip
5 & 6
Not used
98-15304-01
6-Pin
RJ11 Plug
DSL
Cable
Cable
Pin #1
Pin #6