Zhone 7995 ユーザーガイド

B. Standards Compliance for SNMP Traps

The enterpriseSpecific trap indicates that an enterprise-specific event has 
occurred. The Specific-trap field identifies the particular trap that occurred. 

, lists the enterprise-specific traps supported 

by the unit.

enterprisePrimary-
ClockFail(1)

The unit has lost its primary 
clock source.

No variable bindings.

Hardware failure in the unit or 
the clock source.

enterpriseSelfTest-
Fail(2)

A hardware failure of the unit 
is detected during the unit’s 
self-test. The trap is 
generated after the unit 
completes initialization.

Variable bindings:

„

devSelfTestResults

Failure of one or more of the 
unit’s hardware components.

enterpriseDevice-
Fail(3)

An internal device failure.

No variable bindings.

Operating software has 
detected an internal device 
failure.

enterpriseTestStart(5)

A test is running.

Variable bindings:

„

ifIndex (RFC 2863)

„

ifAdminStatus 
(RFC 2863)

„

ifOperStatus (RFC 2863)

„

ifType (RFC 1573)

„

ifTestType (RFC 2863)

At least one test has been 
started on an interface.

enterpriseConfig-
Change(6)

The configuration changed 
via the user interface. The 
trap is sent after 
60 seconds have elapsed 
without another change. This 
suppresses the sending of 
numerous traps when 
multiple changes are made in 
a short period of time, as is 
typically the case when 
changing configuration 
options.

No variable bindings.

Configuration has been 
changed via the ATI.

enterprisePrimary-
ClockFailClear(101)

The STU-C has recovered 
and is using its primary clock 
source.

No variable bindings.

—