Zhone 7995 ユーザーガイド
7. Testing
7990-A2-GB20-20
September 2004
7-13
Device Tests
The Device Tests branch is used to access the only endpoint-level test, the Lamp
Test. To access the Device Tests screen, follow this menu selection sequence:
Test. To access the Device Tests screen, follow this menu selection sequence:
Main Menu
→Test→Device Tests
Lamp Test
The Lamp Test determines whether all LEDs are lighting and functioning properly.
Procedure
To test the LEDs:
1. Position the cursor at the Start command next to Lamp Test on the Device
Tests screen.
2. Press Enter.
The Start command is changed to Stop. During the Lamp Test, all LEDs blink
simultaneously every second. When the Lamp Test is stopped, the LEDs are
restored to their normal condition.
simultaneously every second. When the Lamp Test is stopped, the LEDs are
restored to their normal condition.
3. To stop the Lamp Test, position the cursor at the Stop command and
press Enter.
main/test/card
Model: 799x
DEVICE TESTS
Test Command Status
--------------------------------------------------------------------------------
Lamp Test: Start Inactive
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit