Zhone 2004 ユーザーガイド
R e p o r t s
5-13
1
Select an interface and optionally a port. The IAD then displays the report.
The IAD displays the interfaces from which you may choose on this IAD.
The IAD displays the interfaces from which you may choose on this IAD.
2
Select the interface. The IAD displays the port table and prompts you to
select a port.
select a port.
3
Type the port number and press Enter. The IAD displays the Interface
Statistics menu:
Statistics menu:
NOTICE:
The commands that display on the Interface Statistics menu vary, based
on the WAN module and configuration of the IAD.
on the WAN module and configuration of the IAD.
Figure 5.4
Interface Statistics Menu
4
To display a specific report, type the option. For detailed information about
each report in the Interface Statistics menu, or for information on how to
clear interface statistics, proceed to the appropriate section below.
each report in the Interface Statistics menu, or for information on how to
clear interface statistics, proceed to the appropriate section below.
NOTICE:
When viewing Interface Statistics reports, press the space bar to display
the next page. When have finished viewing, press any key to display the
report, or press Escape to return to the Interface Statistics menu.
the next page. When have finished viewing, press any key to display the
report, or press Escape to return to the Interface Statistics menu.
Display Interface Statistics
NOTICE:
For ADSL Physical Layer Statistics, refer to ADSL Configuration Menu
on page 4-6
on page 4-6