Zhone 2004 ユーザーガイド
3-22
2 0 0 0 - A 2 - G B 2 2 - 0 0
2
Type the IP address of the TFTP server and press Enter. The IAD displays a
prompt for the file name to transfer.
prompt for the file name to transfer.
3
Type the name of the file to transfer and press Enter. To exit without
transferring the file, press Escape or Enter without typing the file name.
transferring the file, press Escape or Enter without typing the file name.
When XMODEM is selected, if the file is not located, the IAD prompts you
for the file transfer speed.
for the file transfer speed.
After the IAD transfers the file via TFTP or XMODEM, reset the IAD
(page 2-8) to use the new file. If you transfer acos.bin using this option,
perform a hard reset (page 3-16).
(page 2-8) to use the new file. If you transfer acos.bin using this option,
perform a hard reset (page 3-16).
TFTP Server Menu
Type “T” on the File Transfer menu to display the TFTP Server menu
(Figure 3.11) where you can enable and disable read access, write access, and
console output.
(Figure 3.11) where you can enable and disable read access, write access, and
console output.
Figure 3.11
TFTP Server Menu
The IAD displays the current settings directly below the menu heading. To
successively enable or disable access or output, execute the option again. The
IAD saves the configuration and displays the menu. When the options are set
correctly, reset the IAD for the changes to take effect.
successively enable or disable access or output, execute the option again. The
IAD saves the configuration and displays the menu. When the options are set
correctly, reset the IAD for the changes to take effect.