Zhone 2004 ユーザーガイド
4-42
2 0 0 0 - A 2 - G B 2 2 - 0 0
Display Error Stats
Type “B” to display the JetStream Voice Gateway error statistics.
Ring Test
This command is reserved for use by Paradyne network engineers only.
Display IAD State
Type “S” on the Call Control Settings menu (Figure 4.34) to display the on
hook state for each port. The IAD displays the following information:
hook state for each port. The IAD displays the following information:
Trace
This option for use by network engineers to configure Trace settings.
Pick Sound Heard if
Insufficient WAN B/W
to Complete Call
1
Type “V” on the Call Control Settings (Figure 4.34) menu to select the
type of dial tone heard by the telephone user if there is insufficient WAN
bandwidth to complete a call. The IAD displays the Insufficient Bandwidth
Indication Setting menu (Figure 4.35) and the current setting:
type of dial tone heard by the telephone user if there is insufficient WAN
bandwidth to complete a call. The IAD displays the Insufficient Bandwidth
Indication Setting menu (Figure 4.35) and the current setting:
Figure 4.35
Insufficient Bandwidth Indication Setting Menu
2
Type “0” to replace the dial tone with silence, or type “1” to replace dial
tone with a fast beeping sound.
tone with a fast beeping sound.
3
Press Escape to return to the Call Control Setting menu and continue
configuration.
configuration.
Zero ErrorStats
Type “Y” on the Call Control Settings menu to reset the JetStream statistics.
Zero Stats Display
Type “Z” on the Call Control Settings menu to display the JetStream
statistics.
statistics.