ZyXEL 2WG ユーザーガイド
Chapter 9 DMZ Screens
ZyWALL 2WG User’s Guide
207
9.3 The Static DHCP Screen
This table allows you to assign IP addresses on the DMZ to specific individual computers
based on their MAC Addresses.
To change your ZyWALL’s static DHCP settings on the DMZ, click NETWORK > DMZ >
Static DHCP. The screen appears as shown.
based on their MAC Addresses.
To change your ZyWALL’s static DHCP settings on the DMZ, click NETWORK > DMZ >
Static DHCP. The screen appears as shown.
Allow between
DMZ and LAN
Select this check box to forward NetBIOS packets from the LAN to the DMZ and
from the DMZ to the LAN. If your firewall is enabled with the default policy set to
block DMZ to LAN traffic, you also need to configure a DMZ to LAN firewall rule
that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to the DMZ
Clear this check box to block all NetBIOS packets going from the LAN to the DMZ
and from the DMZ to the LAN.
Allow between
DMZ and WAN 1
Select this check box to forward NetBIOS packets from the DMZ to WAN 1 and
from WAN 1 to the DMZ.
Clear this check box to block all NetBIOS packets going from the DMZ to WAN 1
Clear this check box to block all NetBIOS packets going from the DMZ to WAN 1
and from WAN 1 to the DMZ.
Allow between
DMZ and WAN 2
Select this check box to forward NetBIOS packets from the DMZ to WAN 2 and
from WAN 2 to the DMZ.
Clear this check box to block all NetBIOS packets going from the DMZ to WAN 2
Clear this check box to block all NetBIOS packets going from the DMZ to WAN 2
and from WAN 2 to the DMZ.
Allow between
DMZ and WLAN
Select this check box to forward NetBIOS packets from the WLAN to the DMZ
and from the DMZ to the WLAN. If your firewall is enabled with the default policy
set to block DMZ to WLAN traffic and WLAN to DMZ traffic, you also need to
configure DMZ to WLAN and WLAN to DMZ firewall rules that forward NetBIOS
traffic.
Clear this check box to block all NetBIOS packets going from the WLAN to the
Clear this check box to block all NetBIOS packets going from the WLAN to the
DMZ and from the DMZ to the WLAN.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to begin configuring this screen afresh.
Table 46 NETWORK > DMZ (continued)
LABEL
DESCRIPTION