ZyXEL 2WG Guía Del Usuario

 Chapter 9 DMZ Screens

ZyWALL 2WG User’s Guide

This table allows you to assign IP addresses on the DMZ to specific individual computers 
based on their MAC Addresses.
To change your ZyWALL’s static DHCP settings on the DMZ, click NETWORK > DMZ > 
Static DHCP. The screen appears as shown.

Allow between 

DMZ and LAN

Select this check box to forward NetBIOS packets from the LAN to the DMZ and 

from the DMZ to the LAN. If your firewall is enabled with the default policy set to 

block DMZ to LAN traffic, you also need to configure a DMZ to LAN firewall rule 

that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to the DMZ 

and from the DMZ to the LAN.

Allow between 

DMZ and WAN 1

Select this check box to forward NetBIOS packets from the DMZ  to WAN 1 and 

from WAN 1 to the DMZ. 
Clear this check box to block all NetBIOS packets going from the DMZ to WAN 1 

and from WAN 1 to the DMZ.

Allow between 

DMZ and WAN 2

Select this check box to forward NetBIOS packets from the DMZ to WAN 2 and 

from WAN 2 to the DMZ. 
Clear this check box to block all NetBIOS packets going from the DMZ to WAN 2 

and from WAN 2 to the DMZ.

Allow between 

DMZ and WLAN

Select this check box to forward NetBIOS packets from the WLAN to the DMZ 

and from the DMZ to the WLAN. If your firewall is enabled with the default policy 

set to block DMZ to WLAN traffic and WLAN to DMZ traffic, you also need to 

configure DMZ to WLAN and WLAN to DMZ firewall rules that forward NetBIOS 

traffic.
Clear this check box to block all NetBIOS packets going from the WLAN to the 

DMZ and from the DMZ to the WLAN.

Apply

Click Apply to save your changes back to the ZyWALL.

Reset

Click Reset to begin configuring this screen afresh.

Table 46   NETWORK > DMZ (continued)