ZyXEL GS-4024 補足マニュアル

 

8

1.  Open your Terminal program (e.g. Hyper Terminal in Windows System). 

2.  Make sure your port settings are: 

bps:9600 

Data bits:8 

Parity: None 

Stop bits:1 

Flow control: None: 

Another way is to telnet / SSH the IP of the Switch Management Interface. 

For In-band interface, the default management IP is 192.168.1.1 (VLAN 1). 

For Out-band interface, the default management IP is 192.168.0.1   

3.  When successfully connected, enter the correct administrator user name 

and password. 

4.  Now you are in the privileged mode.   

5.  Then issue command “configure” to switch to the configuration mode. 

Issue the following commands to use Protocol Based VLAN to sort out all the 

PPPoE traffic on port 1 and mark it with VID 500 and assign it 802.1p priority of 

1. 

 

To enable Protocol Based VLAN on port 1: 

All contents copyright (c) 2006 ZyXEL Communications Corporation.